KUNZ UTS UNIVERSAL TORQUING SYSTEMS
KUNZ UTS Universal Torquing System. A dual spindle nut runner/setter system provides computer controlled torque for all aircraft wheels. The software for the KUNZ UTS is especially written for aircraft wheel torquing.
Two electrically driven spindles are mounted to the overhead swivel beam of the UAS Universal Assembly/Disassembly Stand or to an on-site overhead rail. They are adjustable in distance by electric motor at a push of a button to cover the full range of bolt diameters for all aircraft wheels. The programming and recording of torque data is simple. More then one hundred different programs can be set for different wheel models and the associated torque or angle parameters.
The KUNZ UTS was introduced in 1998, more than 100 systems are in operation today.
Although the working environments inside a wheel shop are tough the KUNZ system is extremely reliable: The monitor, controls and computer are in a separate housing with forced ventilation and dust filter – away from the assembly station. The operator controls the UTS from an industrial standard key board.
A spindle retraction system to speed up the positioning after each nut setting is available at option.
Complete wheel assembly process with KUNZ UAS takes less than 9:00 minutes.*
Complete wheel disassembly process with KUNZ UAS takes less than 8:00 minutes.*
*time measured during the assembly/disassembly of an A330/A340 MLG wheel with 22 bolts.
For more access to pictures and videos, please login or sign-up!
The KUNZ UTS NGtronic® Universal Torquing System Next Generation features fully automated setting of required individual spindle distances and torque values. Every individual wheel data and operator ID can be added to the software which can later be retrieved by using RFiD cards.
An additional sensor system shows on the 12″ touch display which bolts need to be torqued next based on the spindle positioning and when the spindles are above the next set of bolts.
Following information is shown directly on the 12″ touch display: OK/NOK evaluation, P/N of the wheel, name of the program, pre- and final torque value, number of bolts and socket size.
For more access to pictures and videos, please login or sign-up!
KUNZ UTS is designed by KUNZ.
The UTS AUTO Automated Universal Torque System features fully automated torqueing of aircraft wheels including the setting of required individual spindle distances and torque values. Every individual wheel data and operator ID can be added to the software which can later be retrieved by using RFiD cards.
The integrated 12″ touch display allows full access and control, new torque programs can be programmed via remote maintenance or by the operator himself.
The UTS AUTO Automated Universal Torque System will autonomously select the required tools from the featured tool storage system.
The light barrier around the UTS AUTO Automated Universal Torque System guarantees operator‘s safety.
For more access to pictures and videos, please login or sign-up!
UTS AUTO Automated Universal Torque System is designed by KUNZ.
KUNZ UTT UNIVERSAL TORQUE TOOL
KUNZ UTT Universal Torque Tool. A single spindle nut runner/setter with reaction absorbing lift/lower device.
The UTT is equipped with components similar to the UTS as to spindle, computer control and PC and is using the same software as the UTS.
The UTT can be operated side by side to the UTS with one computer source only, if specified at time of order.
Complete wheel assembly process with KUNZ UAS takes less than 10:30 minutes.*
Complete Wheel disassembly process with KUNZ UAS takes less than 9:30 minutes.*
*time measured during assembly/disassembly of an A330/A340 MLG with 22 bolts.
For more access to pictures and videos, please login or sign-up!
KUNZ UTT is designed by KUNZ.
KUNZ ULT UNIVERSAL LOOSENING TOOL
KUNZ ULT Universal Loosening Tool is mounted to a solid frame with four legs. Parallel driven overhead attachment rails allow for horizontal movements in the x- and y-axis.
The nutrunner is mounted to a reaction absorbing shaft assembly and can easily be positioned in vertical direction, as the assembly weight is almost neutralised by two heavy-duty balancers.
For more access to pictures and videos, please login or sign-up!
KUNZ ULT is designed by KUNZ.
KUNZ UTT-L LOOSENING TOOL
The KUNZ UTT-L Loosening Tool consists of a single spindle nut runner, with a power of 600 Nm (442.5 lb ft), for loosening of nuts only.
One electrically driven nut runner is mounted to a reaction absorbing frame assembly with two balancers for easy lifting / lowering.
For more access to pictures and videos, please login or sign-up!
KUNZ UTT-L is designed by KUNZ.
KUNZ CMS COUNTER MEASUREMENT SYSTEM
The microprocessor-controlled measuring instrument is especially suitable for static and dynamic measurements of torque/angle measuring values in connection with torque/angle sensors.
Pneumatic-, electric- and impulse nut runners can be tested and monitored.
For more access to pictures and videos, please login or sign-up!
KUNZ CMS is designed by KUNZ.
